Some Outlook Express Errors - II

Error 0x800CCC05

Not Connected to Server.

1. Can you get webpages? If so you may have the wrong mailserver typed in your account or the server may be down.

2. If you cannot get webpages hangup and try connecting again.

3. Reboot your computer and try again.

4. Still not working? Still not getting webpages? If so, treat as a normal "Not Moving Data" issue. (Check your DNS numbers, rip and reinstall TCP/IP, etc..)

Error 0x800CCC06 - CONN_SEND

Error 0x800CCC07 - WOULD_BLOCK

Error 0x800CCC08 - INVALID_STATE

Error 0x800CCC09 - CONN_RECV

Error 0x800CCC0A-Message download incomplete

1. This is a possible corruption of the pop3uidl file. Close your internet connection and all programs. Search for the file pop3uidl and delete it. Reconnect and it should work.

2. Repeat step 1 with a reboot before you check your mail again.

3. You may have a corrupt or a very large file attachment on the mailserver. Large file attachments mail that are missing headers or mail that do not conform to the mail RFC's can cause this.

Computer Repair and Computer Technical Support will always be provided by Microsoft certified techs 24x7.

More On Tech Support >>

Some Outlook Express Errors

Read More

Some Outlook Express Errors

Error 0x800CCC00

Authentication did not load.

Try closing and restarting OE.

2. Setup a new account in Outlook Express, re-entering your mail connection details. It is possible that your account has become corrupt.

3. Try setting up a second identity and see is it works.

4. If you still cannot connect, wait 20 minutes for a server reset of your account and then try again.

Error 0x800CCC01

Invalid certificate content.

1.Get your certificate re-issued by your authority server.

Error 0x800CCC02

1. Get your certificate re-issued by your authority server.

Error 0x800CCC03

User already connected.

1. You may be logged in on another

2. Some mailservers will not recognize an improper machine. Close all connections on all machines and wait 20 minutes to check again. disconnection in some instances. Your account may be "Poplocked". You can either wait for the "poplock" to time out, or have someone shell into the mailserver and kill the mail task running on your account. This normally only happens with accounts that have UNIX shells.

3. If you are not logged in on another machine or poplocked, then someone may be using/downloading from your account, or something is wrong with your account.

Computer Repair and Computer Technical Support will always be provided by Microsoft certified techs 24x7.

More on Technical Support>>>
CLEAN BOOT
Microsoft's Windows XP Professional (Pro) Parallel Install
How to use System files to create a boot disk to guard against being unable to start Windows XP

Read More

CLEAN BOOT

1.Start the System Configuration Utility

Click Start, click Run, type msconfig, and then click OK.

2.In General tab,uncheck LOAD STARTUP ITEMS.

3. Click the Services tab.

4. Select the Hide All Microsoft Services.

5. Click Disable All, and then click OK..

6. When you are prompted, click Restart to restart the computer.

7.When you receive the following message, click to select the Don't

show this message or launch the System Configuration Utility when Windows

start check box, and then click OK

8.Choose the Normal Startup mode on the General tab to start Windows

normally and undo the changes you made using the System Configuration

Utility.

Click Start, click Run, type msconfig, and then click OK.

The System Configuration Utility dialog box appears.

Click the General tab, click Normal Startup - load all device drivers

and services, and then click OK. When you are prompted, click Restart to

restart the computer.

Computer Repair and Computer Technical Support will always be provided by Microsoft certified techs 24x7.

More on Windows>
Clean/fresh installation of Windows XP
Tips To Fasten Your Broadband Speed
To upgrade to Windows Vista

Read More

Microsoft's Windows XP Professional (Pro) Parallel Install

This will give you an idea on how to do this when and if the time arises when you have a need to parallel install, to either run two operating systems, or to access, repair or retrieve Data from a damaged operating system. This install guide is fully graphical and will take you through each step of the installation.

To start this Windows Parallel install. First check that the first boot device in your system BIOS is set to the CD-ROM Drive

( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your Computer. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting))

If you are unsure or don't want to enter the BIOS then just test the computer by putting the CD-ROM in the drive and reboot your computer. This is the recommended way to install windows.

Also if you have difficulty getting Windows to boot of the CD then check out CD-Rom Support Guide, Change CD-Rom in Bios and Boot Disks to get bootable floppy disk set to install Windows from.

To begin insert your Windows XP Professional CD and reboot you computer. A message "Press any key to boot from CD....." will appear, press the space bar to continue.

Setup will now inspect your computer hardware and configuration.

Setup now prepares your computer for install.

From this menu press "ENTER" to begin the install.

Windows XP License agreement, read, and if you agree press "F8" to continue, press "ESC" if you disagree. If you disagree setup will finish.

Computer Repair and Computer Technical Support will always be provided by Microsoft certified techs 24x7.

Source-windowsxpprofessional.windowsreinstall.com

Read More

How to Use System Files to Create a Boot Disk to Guard Against being Unable to Start Windows XP

If your computer uses an Intel x86-based processor, and the startup record for the active partition or files that you must have to start Windows become corrupted, you may not be able to start your computer. This article describes how to create a startup disk. With a startup disk, you can start your computer if the startup record becomes corrupted.

MORE INFORMATION

Create a Windows startup disk when you first install Windows on the computer. This disk is different from an MS-DOS startup disk. Unlike MS-DOS, the whole Windows operating system cannot fit on one floppy disk. A Windows startup disk contains only the files that you must have to start the operating system with the remainder of the Windows system files installed on the hard disk drive. To create the startup disk, follow these steps:

1. Insert a blank floppy disk in drive A, and then format the disk by using Windows XP.

2. From the root folder of the system partition of your hard disk drive (for example, C:\-), copy the following files to the floppy disk:

Boot.ini

NTLDR

Ntdetect.com

You may have to remove the hidden, system, and read-only attributes from the files.

3. Restore the hidden, system, and read-only attributes to the files on your hard disk if you removed these attributes.

4. If the Bootsect.dos file or the Ntbootdd.sys file resides in the system partition, repeat steps 2 through 4 to copy these files to the boot disk.

If you format a floppy disk in Windows XP, the startup record points to the NTLDR file. When NTLDR runs, it loads the available operating system selections from the Boot.ini file. If you select Windows, NTLDR runs Ntdetect.com, and then passes control to Osloader.exe. If you select MS-DOS or OS/2, NTLDR loads Bootsect.dos.

Computer Repair and Computer Technical Support will always be provided by Microsoft certified techs 24x7.

Read More